【實用工具app】CTL 44B|最夯免費app-gigacircle

The DSP Wireless Inc. CTL44B v2 App is a User Interface control for the Bose® ControlSpace® group of Commercial Audio products. CTL44B is of no use to you if you do not wish to configure and control a Bose® ESP or PM8500N based commercial audio installation. CTL44B v2 is not a control for Bose consumer equipment. The CTL44B v2 App will behave in a manner similar to the ConstrolSpace® CC-64 Controler. CTL44B v2 is configured by creating a CC-64 control in CSD and giving it the IP number that is assigned to your iOS device. With the CTL44B v2 App open on your iOS device, Up-Load the new design. The CTL 44B will then behave as a wireless version of your wired-in CC-64. You may want to use static IP numbers on your iOS device to reduce changes to the ControlSpace® configuration. Settings menu contains: Background Color - 4 shades of gray. Status Update Rate - heartbeat to check that device is still in range. Message Timeout Rate - increase if network latency is high. Show IP number - adds IP number to display. Show Status message - adds status do display.Backlight enable - Enable screen dim. Volume control enable - Enables volume and mute buttons. To use the CTL44B v2 your Bose® ESP or PM8500N must be connected to an Ethernet network that is WiFi enabled. The CTL44B v2 connects to your Bose® ControlSpace® audio device via WiFi. If you do not have WiFi connected to your audio device Ethernet network, the CTL44B v2 will not function. Once your iOS device has an IP number that is on the local ControlSpace® network, you can scan for the CTL44B v2 using CSD. Please see the user guide located at dspwi.com for detailed information on how to set up and use the CTL44B. The DSP Wireless CTL44B v2 is a Universal iPhone / iPad App. It has been tested on iPhone , iPod Itouch 5th generation, iPad2, iPad Mini and iPad Air. CTL 44B v2 requires iOS 7 and above.The CTL44B App has been tested with CSD v3.1 and CSD v4.0. Other CSD versions may work ok but are not supported.